Yaesu WIRES-X TM-400XDE Скачать руководство пользователя страница 25

Страница: 25 / 66

Function

Key or Dial

Reverses the transmit and receive frequencies

Press and the

key ~

key on the microphone*

*Setting of "

REVERSE

" function is necessary for P1

~ P4 keys in set mode.

Squelch OFF

Press the

key on the microphone (by default setting)

Adjusts the squelch level

Press the

SQL(VOICE)

key, then rotate the DIAL knob

Switches Busy detection between “Noise squelch” and “DG-ID number match”. Press and hold the

A/B(DW)

key

Some setting items in the set mode are automatically set for the Portable Digital Node function, so these settings cannot be used.

2. Setting the transmit and receive DG-ID number.

This procedure is unnecessary if the transceiver is already set to the required transmit and receive DG-ID

number.

Since the transmit and receive DG-ID number is “TX: 00” and “RX: 00”, it operates as an open node and is

accessible from all transceivers using C4FM digital mode.

When using a portable node station to be accessed only by the specific members, set the transmit and receive

DG-ID to a number other than “00”.

• In the Access Point, if the receive DG-ID is set to other “00”, set the

transmit

DG-ID number to the same DG-ID

number. Note that setting to a different number will not work properly.

• When setting the receive DG-ID number to “00” and then setting the transmission DG-ID number to anything other

than “00”, the audio of all received C4FM digital stations will be heard on the speaker, but for the transmission DG-

ID Only the matched communication is relayed to the opposite station on the Internet.

• The DG-ID Subcode cannot be used or set in Portable Digital Node mode.



FT5D

1. Press the [

menu

] key, and touch [

DG-ID

• If [

DG-ID

] is not displayed, touch [

BACK

] to display [

DG-ID

] and then touch it.

• T

he DG-ID SETUP screen is displayed on the LCD.

DG-ID TX : 00

DG-ID RX : 00

2. Press the [

menu

] key, then rotate the DIAL knob to set the transmit DG-ID

(DG-ID TX).

When setting the DG-ID number, pressing and holding the [

GM/X

] key will set

the transmit and the receive DG-ID numbers to “00”.

DG-ID TX : 50

DG-ID RX : 00

3. Press the [

menu

] key, then rotate the DIAL knob to select “

DG-ID RX

”.

DG-ID TX : 50

DG-ID RX : 00

4. Press the [

menu

] key, then rotate the DIAL knob to set the receive DG-ID (DG-ID

RX).

DG-ID TX : 50

DG-ID RX : 50

5. Press the [

BACK

] key or the PTT switch to save the setting and return to the

normal operation.

The setting of the FT5D transceiver is complete.

Содержание WIRES-X TM-400XDE



































































Результаты поиска

Содержание WIRES-X TM-400XDE

Отзывы:

Похожие инструкции для WIRES-X TM-400XDE

Бренды по названию

Популярные бренды

Yaesu WIRES-X TM-400XDE, Инструкция по эксплуатации

Результаты поиска

Содержание WIRES-X TM-400XDE

Отзывы:

Похожие инструкции для WIRES-X TM-400XDE

Бренды по названию

Популярные бренды