35
If the portable node is already connected to a node or a room on the Internet
③
When connected to the same node or room as the ID of the previous connection history
The current connection ID is displayed in the LCD. To communicate with this
Communicating with other station
④
When connected to a node or room different from the previous connection history
The
“►” and the
current connection ID are displayed on the LCD.
When the DIAL knob is turned, the previous connection ID will blink. In this
case, press the
PTT
switch to connect to the previous connection ID.
While operating the Portable Node, it may not be possible to switch between “
Access Point
” and “
Direct Operation
”.
Press and hold the [
D X
] key to return to the transceiver setting screen, then press the [
A/B
] (DW) key.
While operating the portable node, the following functions may be set and operated on the portable node FTM-100D
transceiver.
Function
Key or Dial
Return to the transceiver setting screen
Press and hold the
D X
key
Adjusts the squelch level
Press the
SQL (VOICE)
key, then rotate the
DIAL
knob
Enters the BACKTRACK screen
Press the
DISP (SETUP)
key
Selects the Transmission Power Level
Press the
TX PO
key or press the
P4
key on the microphone (By
default setting)
Selects Speaker Mute
Press the
A/B (DW)
key
Turning the display ON and OFF
Press and hold the
DISP (SETUP)
key
Disconnects a node or a room on the Internet
Press and hold the
*
key on the microphone
Setting the speaker mute
The audio output to the speaker of the node station FTM-100D transceiver can be muted, it cannot be set in Direct
Operation.
Touch the [
A/B
] (DW) key each time toggles the mute mode as follows.
MUTE OFF
MUTE ALL
MUTE TX
MUTE RX
MUTE OFF
・・・
MUTE OFF
: Disable mute.
MUTE ALL
: Mute both the received voice from the C4FM digital station and the voice from the node station on the
Internet.
MUTE RX
:
Mute the received voice from the C4FM digital station.
MUTE TX
:
Mute the voice from the node station on the Internet.
