Yaesu WIRES-X TM-400XDE, Инструкция по эксплуатации

Страница: 50 / 66

49
Using the Portable HRI Mode
When communicating via the Internet in “ Portable HRI Mode ”, refer to “ Adjusting Audio Level in the Access Point
(Portable HRI Mode) ” (page 57) or “ Adjusting Audio Level in the Direct Operation (Portable HRI Mode) ” (page 59)
and adjust the audio level of the computer.
Connecting the transceiver and the PC
Refer to “
Communicating with digital or analog FM mode (Portable HRI Mode)
” (page 13) and connect the
transceiver to the PC.
Starting the WIRES-X software
1. Double click the [ Wires-X ] icon on the desktop of the computer screen.
The main screen of WIRES-X software is displayed.
For details about the main screen, refer to “ WIRES-X Software Main Screen ” (page 54).
Starting the transceiver in special mode
• To return the transceiver to the normal mode, repeat procedure 1 in the below.
• To switch between “
Portable Digital Node Mode ” and “ Portable HRI Mode ”, return the transceiver to the normal mode
first and then perform the above operation.
-The transceiver connected to the PC of the portable station cannot use the news station function or the GM function.

FT5D
1. Press and hold the [ GM/X ] key and the [ F menu ] key simultaneously, while turning the radio ON .
2. Press the [ A/B ] key to select “ Access Point ” or “ Direct Operation ”.
The set operation mode is indicated on the frequency display as follows:
Access Point: “(Frequency Display)”
Direct Operation: “DIRECT”
To communicate with an analog node station via Direct Operation using the FT5D transceiver, press the [ V/M ] key to
turn ON the analog voice output (uplink). An
“ ＊ ”
will appear on the screen at the right side of the call sign. For details,
refer to “Output of analog audio (uplink) setting” (page 50).

FT3D/FT2D
1. Press and hold the [ X ] key and the [ BACK ] key simultaneously, while turning the radio ON .
2. Press the [
A/B
] key to select “
Access Point
” or “
Direct Operation
”.
The set operation mode is indicated on the frequency display as follows:
Access Point: “(Frequency Display)”
Direct Operation: “DIRECT”
To communicate with an analog node station via Direct Operation using the FT5D, FT3D and FT2D transceiver, press
the [
V/M
] key to turn
ON
the analog audio output (uplink). An “ ＊ ” will appear on the screen at the right side of the call
sign. For details, refer to "Output of analog audio (uplink) setting" (page 50).

FTM-400XD/D
1. Press and hold the [ D X ] key and the [ GM ] key simultaneously, while turning the radio ON .
2. Press the B-Band DIAL knob to select “ Access Point ” or “ Direct Operation ”.
The set operation mode is indicated on the A Band frequency display as follows:
Access Point: “ （ Frequency display ） ”
Direct Operation: “DIRECT”