30
Function
Key or Dial
Return to the transceiver setting screen
Press and hold the
X
key
Enters the BACKTRACK screen
Press the
DISP
key
Enters the Set mode*
Press and hold the
DISP
key
Displays the frequency display screen
Press the
V/M
key
Displays the Function menu Screen*
Press the
V/M
key and then touch [
F MW]
on the LCD screen
Selects the Transmission Power Level
Touch [
TXPWR
] in the Function Menu Screen
Selects Speaker Mute
Press the
A/B
key
Disconnects a node or a room on the Internet
Press and hold the
BAND
key
Squelch OFF
While
MONI
key is pressed
Adjusts the squelch level
FT3D: Press the
SQL
key, then rotate the
VOL
knob
FT2D: Press the SQL key, then rotate the
DIAL
knob
*Some items in the Set mode and Function menu are automatically set for the Portable Digital Node function, so the
settings cannot be used.
Setting the speaker mute
The audio output of the speaker of the node station FT3D/FT2D transceiver cannot be muted, it cannot be set in
Direct Operation.
Press [
A/B
] key each time toggles the mute mode as follows.
MUTE OFF
MUTE ALL
MUTE TX
MUTE RX
MUTE OFF
・・・
MUTE OFF
: Disable mute.
MUTE ALL
: Mute both the received voice from the C4FM digital station and the voice from the node station on the
Internet.
MUTE RX
:
Mute the received voice from the C4FM digital station.
MUTE TX
:
Mute the voice from the node station on the Internet.
When the MUTE setting is enabled, the mute icon “ ” blinks at the top of the LCD.
When the frequency setting screen is displayed, the mute setting status is displayed for about 1 second on the screen
each time you press the [
A/B
] key.
