Yaesu WIRES-X TM-400XDE Скачать руководство пользователя страница 14

Страница: 14 / 66

Communicating with digital or analog FM mode

(

Portable HRI Mode

)



FT5DR/DE, FT3DR/DE or FT2DR/DE

Since the cable connection for the FT5D/FT3D/FT2D transceiver differs between Access Point and Direct Operation,

please refer to the following and make the connections according to the mode to be used.

《

When operating in Access Point

》

1. For the WIRES-X Node mode connection, use the SCU-19 USB Connection Cable, the CT-44 adapter & two

audio cables that are supplied in the SCU-39 Connection Kit (sold separately) as shown in the figure.

USB

Speaker

MIC

DATA Jack

MIC/SP Jack

Φ3.5 plug (Gray)

Φ2.5 plug (Black)

Φ3.5 plug (Black)

• To prevent RF interference, keep the antenna of the transceiver as far away from the connecting cables and PC as possible.

• It is recommended to set the transmit output power of the transceiver as low as possible for the desired communication.

The connection is complete.

After completing “

Initial Setting (setting is required only once at the beginning)

” (page 15), the volume level of

the microphone and PC speaker must be set by referring to “

Adjusting Audio Level in the Access Point (Portable

HRI Mode)

” (page 57).

《

When operating in Direct Operation

》

1. For the WIRES-X Direct mode connection, use the SCU-19 USB Connection Cable, the CT-44 adapter & one of

the audio cables that are supplied in the SCU-39 Connection Kit (sold separately) as shown in the figure.

USB

MIC

DATA Jack

MIC/SP Jack

Φ3.5 plug (Gray)

The connection is complete.

In “

Direct Operation

” of Portable HRI Mode with FT5D/FT3D/FT2D transceiver, the audio from the other station is heard only

from the PC speaker. After completing “

Initial Setting (setting is required only once at the beginning)

” (page 15), the

volume level of the microphone and PC speaker must be set by referring to “

Adjusting Audio Level in the Direct Operation

(Portable HRI Mode)

” (page 59).

To adjust the receive volume level, turn the

VOL

knob of the FT5D/FT3D/FT2D transceiver, or adjust the PC speaker volume.

Содержание WIRES-X TM-400XDE



































































Результаты поиска

Содержание WIRES-X TM-400XDE

Отзывы:

Похожие инструкции для WIRES-X TM-400XDE

Бренды по названию

Популярные бренды

Yaesu WIRES-X TM-400XDE, Инструкция по эксплуатации

Результаты поиска

Содержание WIRES-X TM-400XDE

Отзывы:

Похожие инструкции для WIRES-X TM-400XDE

Бренды по названию

Популярные бренды