User’s Manual
89
5.6
Event Setup >
This menu allows user to determine
XDVR2
behavior in response to an alarm
event. In the Main menu, move the cursor to <Event Setup> and press
ENTER. The following menu is displayed.
Event Setup
1. Internal Buzzer
2. Event Icon
3. Email Notice
4. Email Attachment
5. SMS Setup
6. Event Full Screen
7. Event Duration
8. Per Channel Config
ON
ON
OFF
OFF
None
5 sec
Items in the Event Setup menu are described in the following subsections.
5.6.1
Internal Buzzer >
This item allows user to enable / disable the
XDVR2
internal buzzer. If set to
<ON>, the buzzer is activated in response to an alarm. If set to <OFF>, the
buzzer is not activated. The default setting is <ON>.
5.6.2
Event Icon >
The item enables (ON) / disables (OFF) the display of Event Icon on the main
monitor when an alarm event occurs. The default setting is <ON> (enable).
The event types are represented by a character respectively; the descriptions
are as below table.
Event type
Description
A
Alarm in event
M
Motion detection event
L
Video loss event
Содержание XDVR2
