User’s Manual
58
5.1.6.1 LAN Select >
PPPoE stands for Point-to-Point Protocol over Ethernet, which is a
specification for connecting the users on an Ethernet to the Internet through a
common broadband medium.
This item allows you to select your service type between <LAN>, <PPPoE> or
<None>; if you are using an intranet for communication, please select <LAN>,
if you are using a broadband medium, such as DSL Line or cable modem,
please select <PPPoE>.
If <None> is selected, then there is no need to set further LAN/PPPoE setting,
therefore, the second item <LAN Setup> will not be accessible.
5.1.6.2 LAN Setup >
The network related settings in the LAN Setup menu should be associated
with the network service type. If you select <LAN> for <LAN Select>, then 6
th
to 8
th
item will not be available.
Select <LAN Setup> in Network Setup menu and press ENTER for setting the
parameters; the menu displays as follows.
LAN Setup
1. DHCP
2. IP
3. Netmask
4. Gateway
5. DNS
6. PPPoE Account
7. PPPoE Password
8. PPPoE Max Idle
9. Connect At Booting
10. Network Restart
OFF
192.168.1.150
255.255.255.0
192.168.1.1
0.0.0.0
35min
YES
NO
-
DHCP >
This item allows user to obtain a dynamic IP address from DHCP (Dynamic
Host Configuration Protocol) server during the unit boots up. When using
DHCP, the settings are dynamic and they will change every time you power up
and power off the unit, depending on your network's setup.
Содержание XDVR2
