User’s Manual
52
5.1.1.3 Software Upgrade via Local Device >
This item is used for updating the
XDVR2
software by local device. The menu
is displayed as follows.
Software Upgrade via Local Device
Upgrade Version
xxxx-xxxx-xxxx-xxxx
Select
NO
Connect an USB drive contains upgrade software to the unit; the available
upgrade files will be listed in the menu. To update the system, select a file and
use UP / DOWN keys to choose <YES>. Press ENTER to confirm the
selection and start the upgrade process. The
XDVR2
unit uploads the
software, updates the system files, and reboots automatically.
The upgrade may take several minutes to save the changes in the memory of
the system. After reboot the unit, please check the software version again.
NOTE:
No power interruption is allowed during the software update.
Ensure that no power interruption can occur until the unit is completely
rebooted.
NOTE
: Do not remove the external USB ThumbDrive
®
/ CD-ROM
before the unit has completely shut down (hard drive and fan are off).
Removing the external USB ThumbDrive
®
/ CD-ROM before shut
down can cause the system to update improperly.
5.1.1.4 Software Upgrade via Internet >
The item is used to upgrade the unit’s software via the internet. Select one of
the listed software versions and choose <YES>. The
XDVR2
uploads the
software, updates the system files, and reboots automatically.
Содержание XDVR2
