Y3K XDVR2, Руководство пользователя

Страница: 46 / 124

User’s Manual
45
To configure dome protocol, select a camera first and set the communications
protocol associated with dome camera using the Direction keys and ENTER.
The available protocol includes <DynaColor>, <Pelco D>, <Pelco P>,
<AD422> and <None> (default).
NOTE: The settings become effective after saving the changes and
exiting from the menu.
4.6.3 RS485 Setup
XDVR2 controls the domes via RS-485 communication protocol. The RS-485
parameters of XDVR2 must be set to the same as the parameters set in dome
camera .
Users are allowed to change the RS-485 settings of the
XDVR2 . Select
<System Setup> in Main menu, then select <RS485 Setup> from the System
Setup menu and press ENTER. The following menu is displayed.
RS485 Setup
1 Unit ID
2 Baud Rate
3 Bits
4 Stop
5 Parity 224
9600
8
1
None
The ID number must match the ID address set by the dome. The Unit ID is in
the range of 1 to 255. The default ID is 224. Note that no two devices on the
same bus should be given the same ID address, or a conflict may occur.
The default
XDVR2 RS-485 settings are 9600 Baud, 8 Data Bits, 1 Stop Bit
and No Parity.
NOTE: The settings become effective after saving the changes and
exiting from the menu.