User’s Manual
63
NOTE:
The Sever IP and the Client IP must not be set the same one;
but they have to set in the same domain.
For example: Server IP: 192.168.0.1
Client IP: 192.168.0.2
-
Dial-in Password >
The item allows user to setup the Dial-in password. Follow these steps to
setup the login password.
•
Select <Dial-in password> from Dial-in Setup menu and press ENTER. A
virtual keyboard displays.
•
Use Direction keys to select character.
•
Press ENTER to add the selected character to the password entry field.
•
When done, move the cursor to <OK> and press ENTER to save the
settings and exit.
-
Server IP >
The item is for setting the IP address that identifies the
XDVR2
unit over
modem connection. To set the server IP, follow these steps:
•
Select <Server IP>.
•
Using LEFT/ RIGHT to move the cursor over the IP, and stop on where you
want it to be changed.
•
Press ENTER, and then use UP/ DOWN to change the value.
•
When done, press ENTER again to exit.
•
Repeat the procedure till the IP is set completely.
-
Client IP >
The item determines the remote PC’s IP address for connecting with the
XDVR2
unit. To set the Client IP, follow these steps:
•
Select <Client IP>.
•
Using LEFT/ RIGHT to move the cursor over the IP, and stop on where you
want it to be changed.
•
Press ENTER, and then use UP/ DOWN to change the value.
•
When done, press ENTER again to exit.
•
Repeat the procedure till the IP is set completely.
Содержание XDVR2
