Y3K XDVR2, Руководство пользователя

Страница: 69 / 124

User’s Manual
68
5.1.6.5 Trigger Port >
To avoid the default service port (port 100) to be blocked, the item enables
user to change port 100 into another port.
To change the trigger port, move the cursor over <Trigger Port> and press
ENTER, then adjust the setting by UP / DOWN keys.
5.1.6.6 Email Address >
This item is used to edit the e-mail address where alarm event information will
be sent. Follow these steps to setup the e-mail address.
•
Select <Email Address> from Network Setup menu and press ENTER. A
virtual keyboard displays.
•
Use Direction keys to move the cursor for selecting character.
•
Press ENTER to add the selected character to the password entry field.
•
When done, move the cursor to <OK> and press ENTER to save the
settings and exit.
5.1.6.7 SMTP Setup >
Simple Mail Transfer Protocol (SMTP), a protocol for sending e-mail
messages between servers. SMTP is a relatively simple, text-based protocol,
where one or more recipients of a message are specified and the message
text is transferred.
Select < SMTP Setup> from Network Setup menu and press ENTER; the
menu displays as follows.
SMTP Setup
1. Email via SMTP
2. SMTP Server
3. SMTP Port
4. SMTP Account
5. SMTP Password NO
25
- Email via SMTP >
The item enables user to determine if the unit sends e-mail via SMTP. Select
<YES> to send e-mail via SMTP using direction keys; if not, select <NO>.