Y3K XDVR2, Руководство пользователя

Страница: 21 / 124

User’s Manual
20
NOTE: For XDVR2, Call key will still take effect when the unit is under
key locked mode. It is used for accessing “Two Main Monitor Out”
function.
10. ZOOM/ENTER
•
In OSD menu or selection interface, press the key to make the selection or
save settings.
•
In live full screen view mode, press to view a 2
×
zoom image; press it
again to return.
11. Direction Keys
•
In Zoom mode, these keys function as Direction keys.
•
In the OSD setup menu, the Direction keys are used to move the cursor to
previous or next fields. To change the value in the selected field, press UP
/ DOWN keys.
12. CHANNEL
•
When in both Live and Playback modes, press the CHANNEL key to view
the corresponding video in full screen. The number of the CHANNEL keys
corresponds to the number of cameras supported by the unit.
•
When in dome control mode, the key named “1” is used to access the
Set/Go preset menu; the key named “2” is used to hide or display the
dome setting parameters.
13. JOG/SHUTTLE
The jog/shuttle knob, shown as below figure, is a combination of a shuttle ring
with an embedded jog disk, which is used to provide wide latitude in playback
control. Note that the jog/shuttle knob is active only when the DVR unit has
been under Playback mode.