Y3K XDVR2, Руководство пользователя

Страница: 92 / 124

User’s Manual
91
Connect the GSM/GPRS Modem and the RS232 connector of the unit, which
is positioned on the rear panel. Then enter the OSD setup menu and select
<SMS Setup>. The following menu displayed.
SMS Setup
1. SMS Notice
2. PIN Authentication
3. PIN Code Setup
4. Receiver Number
5. Send Test Message OFF
ON
Execute
SMS Notice
Select <ON> to send out short message to the assigned mobile phone; and
select <OFF> to disable this function. Select <OFF>, the rest items listed in
this sub-menu will no longer be accessed.
PIN Authentication
If you have set PIN code to protect your mobile phone, then you have to select
<ON> for this item and enter the set PIN code in the next item.
PIN Code Setup
Used to set the PIN code which has been set for protecting your mobile
phone.
Receiver Number
Allow you to enter the number of the assigned mobile phone, which the short
message will be sent to.
Send Test Message
Select this item to send a test message to see the setup is successfully done
or not.
5.6.6 Event Full Screen
This function allows the unit to display the alarm channel in full screen size
when an alarm is triggered.
Select <None> to enable this function; select <Main> to display the alarm
channel on Main Monitor when an alarm is triggered; select <Call> to display
the alarm channel on Call Monitor; and select <Both> to display the alarm
channel on both Main Monitor and Call Monitor.