Xylem YSI pH/ISE 1320P, Руководство по эксплуатации

Страница: 84 / 106

TruLab pH/ISE 1320 Data storage
ba76161e01 08/2015
84
Quitting the display To quit the display of stored measurement datasets, you have the following
options:
 Switch directly to the measured value display with <M> .
 Quit the display and move to the next higher menu level with <F1> / [Back] .
10.3.2 Erasing the measurement data storage
Erasing the measurement data storage (see section 10.3.1 E
DITING THE
MEASUREMENT DATA STORAGE
, page 82).
10.3.3 Measurement dataset
A complete dataset includes:
 ID number
 Date/time
 Measured values of the connected sensors
 Measured temperature value of the connected sensors or manually set tem-
perature
 AutoRead info: The AR indicator appears with the measured value if the
AutoRead criterion was met while storing (stable measured value). Other-
wise, there is no
AR indicator.
 Calibration evaluation: +++, ++, +, -, or no evaluation
10.3.4 Storage locations
The TruLab pH/ISE 1320 meter has two measurement data storages. The
measured values recorded either manually or automatic are stored separately
in individual measurement data storages.
Storage Maximum number of datasets
Manual data storage 200
Automatic data storage 5000