Xylem YSI pH/ISE 1320P, Руководство по эксплуатации

Страница: 75 / 106

TruLab pH/ISE 1320 Settings
ba76161e01 08/2015
75
Alternative tempera-
ture
On
Off
Takes the temperature
value from the 2nd sensor.
Man. temperature -25 ... +25 ... +130 °C Entry of the manually deter-
mined temperature. For
measurements without tem-
perature sensor only.
ISE setup /
AutoRead criterion
low
medium
high
Selection of the AutoRead
criteria (see section 8.1.1
M
EASURING THE ION CON
-
CENTRATION
, page 45).
ISE setup /
Ion type
Ag, Br, Ca, Cd, Cl, CN,
Cu, F, I, K, Na, NO3,
Pb, S, NH3, NH4*,
CO2, ION Selection of the ion type to
be measured.
An ion that is not included in
the list can be measured
with the setting, ION.
ISE setup /
Unit
mg/l
µmol/l
mg/kg
ppm
% Selection, with which unit
the measurement result and
calibration standards should
be displayed.
ISE setup /
Ion type / ION
Valency
Molar mass Set the valence ( Valency )
and molar weight ( Molar
mass ) for the ion.
ISE setup /
Density
0.001 ... 9.999 g/ml or
kg/l Adjustable density of the
test sample (only with
Unit :
mg/kg, ppm, %)
Method Standard addition
Standard subtraction
Sample addition
Sample subtraction
Blank value addition Selection of the available
measuring methods.
Start method Start measurement with the
selected method.
Menu item Possible setting Description