XTBA DALI Watch Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 26

XTBA DALI Watch Скачать руководство пользователя страница 20

XTBA DALI Watch Manual Page

20

of

26

Product # - 03/2013

© XTBA 1986 – 2013

Pressing the Menu button will take you through the Options loop. User options
are stored by the XTBA DALI Watch on exit of the User Option Menu.

Display in Percent:

Pressing the Yes key toggles between the decimal

display values (0 to 253, max) or percent values (0 to 98, max).

Level Commands:

Pressing the Yes key toggles between on or off. If level

commands are set off the Watch will ignore any level (arc power) commands
in View Commands Live, Command History, Raw Data.

This  filters  out  the  level  commands  so  if  configuration  commands  are
interleaved  with  level  commands  they  can  be  detected  more  simply  and
device history will not be filled with a load of short addressed level commands.

Block Repeat Data:

Pressing the Yes key toggles between on or off.

If set on when in advanced commands only new data will be stored into
memory.

Display Find:

Sets the level the fixture will be lit to in discovery, patch,

remove address etc. – range 0 to 100%.

Advanced Menus:

Pressing the Yes key toggles between on or off.

With Advanced Menus set to off some of less used DALI functions are
removed from the DALI menu loops.

Local Buss PSU

See page 2 for details of this Top Menu.

Development Tools

Double Send Comms:

Pressing the Yes key toggles between on or off.

The  DALI  standard  requires  that  commands  32  to  128,  randomise  and
initialise  need  to  be  sent  twice  within  100ms.  So  this  should  normally  be  set
for  ON  and  the  XTBA  DALI  Watch  will  send  them  out  as  required.  Turning
them off allows for testing of devices to ensure they do not respond to single
commands.

«
...
18
19
20
21
22
...
»

Содержание DALI Watch



























Отзывы:

Нет отзывов