XTBA DALI Watch Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 26

XTBA DALI Watch Скачать руководство пользователя страница 14

XTBA DALI Watch Manual Page

14

of

26

Product # - 03/2013

© XTBA 1986 – 2013

Discover/Program All

Before  a  DALI  installation  can  be  fully  used  the  devices  need  to  have  their
short  address  set,  (but  you  knew  that).  DALI  fixtures  do  not  have  address
switches  so  the  only  way  to  set  the  address  is  using  a  programmer.
Fortunately you have one.

Pressing yes with the display in Discover/Program All the display will change
to:

W I L L E R A S E

A L L

D A T A

y e s o r

f u n c t i o n = e s c

This  is  warning  you  that  you are about to do  something  drastic.  If you  press
Yes  all  connected  fixtures  will  be  reset  and  any  existing  short  address
removed. The display will show ‘ERASING DEVICES’ and count up from 0 to
63  the  display  will  then  briefly  change  to  LOADING  DEFAULTS  where  all
fixtures are programmed as follows: Power On Level = 1, Minimum Level = 1,
System  Failure  Level  =  0,  Max  Level  =  254.  Following  discovery  you  can
change these settings in Quick Set Up if needed.

Once the defaults are set the display will change to:

S E A R C H I N G D E V I C E S

2 5 4

1 2 3

0 2 1

On the lower line you will see the search address being scanned through. In
reality this tells you next to nothing but at least you can see something is
going on and is fun to watch. Once a device has been discovered that fixture
will light to the ‘display find’ value (set in user options- default 50%) so you
can see which it is and the display will change to:

S . A D D R E S S

=

1

m e n u = r e j e c t y e s = s e n d

If you are not sure what address to program pressing Menu will remove the
fixture form the discovery process and not program the address. You can then
run Discover New at a later time to assign that fixtures address.

Or:

Using the Up/Down keys the fixtures address can now be assigned. Pressing
Yes will program that fixture to the short address selected and will display
PROGRAMED AND VERIFIED if successful.

Following  this  the  Watch  will  now  search  for  the  next  unassigned  fixture  to
program. Once the fixture has been identified and lit it can now have its short
address  assigned  using  the  Up/Down  keys.  If  a  fixture  has  already  been
assigned  a  short  address  USED  will  appear  on  the  to  right  of  the  display  to
warn  you  that  you  are  about  to  assign  another  fixture  to  an  address  that  is
already in use.

«
...
12
13
14
15
16
...
»

Содержание DALI Watch



























Отзывы:

Нет отзывов