Xirrus XR-1220, Руководство пользователя

Страница: 86 / 200

Wireless Array
66 Installing the Wireless Array
Figure 37. Network Interface Ports—XR-6000 Series
Using the Serial Port
If using the serial port to make your connection, use serial settings of 8 bits, no
parity, no flow control, 1 stop bit (8N1) and a speed setting of 115200 baud. Use
the communication package of your choice.
Using the Ethernet Ports
By default, the Array's Ethernet interfaces use DHCP to obtain an IP address. If
the Array is booted and does not receive DHCP addresses on Gigabit Ethernet
ports, then both Gigabit1 and its bonded pair port will default to 10.0.2.1.
If the Array is connected to a network that provides DHCP addresses, the IP
address can be determined by the following three methods:
1.
The simplest way to address the Array is using its default hostname
which is the Array’s serial number (for example, X
R4012 3091CACD). If
your network provides DHCP and DNS, then you can use this hostname.
2. Otherwise, examine the DHCP tables on the server and find the addresses
assigned to the Array (Xirrus MAC addresses begin with 000F7D).

The Xirrus Xircon utility may also be used to communicate with Arrays
locally as an alternative to using a serial connection to the console.
This is
especially useful for the XR-1000, which does not have a console port.
Serial (Console)
Gigabit POE1 (gig1)
Gigabit POE2 (gig2)
Gigabit 3 (gig3)
Gigabit 4 (gig4)