Xirrus XR-1220, Руководство пользователя

Страница: 41 / 200

Wireless Array
Installing the Wireless Array 21
Installing the Wireless Array
The instructions for completing a successful installation include the following
topics:

“Installation Prerequisites” on page 21 .

“Planning Your Installation” on page 24 .

“Installation Workflow” on page 56 .

“Installing Your Wireless Array” on page 58
.

“Powering Up the Wireless Array” on page 62 .

“Establishing Communication with the Array” on page 65 .

“Performing the Express Setup Procedure” on page 69 .
Installation Prerequisites
Your Wireless Array deployment requires the presence of hardware and services
in the host wired/wireless network, including:

Power Source
Most Arrays are powered via Xirrus Power over Gigabit Ethernet. PoGE
supplies power over the same Cat 5e or Cat 6 cable used for data, thus
reducing cabling and installation effort. PoGE power injector modules are
available in 1-, 2-, and 8-port configurations and are typically placed near
your Gigabit Ethernet switch. An AC outlet is required for each injector
module. Current Array models have integrated splitters, so no separate
splitter is required.

Ethernet ports
You need at least one 100/1000 BaseT port to establish wired Gigabit
Ethernet connectivity.
XR Series Arrays have one, two, or four Gigabit
ports, depending on the model (see “XR Wireless Array Product Family”
on page 6).