Xirrus XR-1220, Руководство пользователя

Страница: 119 / 200

Wireless Array
Viewing Status on the Wireless Array 99
Network Map
This window offers detailed information about this Array and all neighboring
Arrays, including how the Arrays have been set up within your network.
Figure 52. Network Map
The Network Map has a number of options at the top of the page that allow you
to customize your output by selecting from a variety of information that may be
displayed. You may sort the rows based on any column that has an active column
header, indicated when the mouse pointer changes to the hand icon . Click
Refresh to update the information at any time. Click Auto Refresh to instruct the
Array to refresh this window automatically.
Content of the Network Map Window
By default, the network map shows the following status information for each
Array:

Array Name : The host name assigned to the Array. To establish the host
name, go to “Express Setup” on page 149 . You may click the host name to
access WMI for this Array.

IP Address : The Array’s IP address. You may click the address to access
WMI for this Array. If DHCP is enabled, the Array’s IP address is
assigned by the DHCP server. If DHCP is disabled, you must assign a
static IP address. To enable DHCP or to assign a static IP address for the
Array, go to
“Express Setup” on page 149 .