Xirrus XR-1220, Руководство пользователя

Страница: 175 / 200

Wireless Array
Configuring the Wireless Array 155
j. Adjust Time (hrs:min:sec) : If you are not using NTP, check this box if
you want to adjust the current system time. When the box is checked,
the time fields become active. Enter the revised time (hours, minutes,
seconds, am/pm) in the corresponding fields. If you don’t want to
adjust the current time, this box should be left unchecked (default).
k. Adjust Date (month/day/year) : If you are not using NTP, check this
box if you want to adjust the current system date. When the box is
checked, the date fields become active. Enter the revised date (month,
day and year) in the corresponding fields. If you don’t want to adjust
the current date, this box should be left unchecked (default).
12. IAP Settings:
Enable/Configure All IAPs : Click on the Execute button to enable and
auto configure all IAPs (a message displays the countdown time — in
seconds — to complete the auto-configuration task). When an IAP is
enabled, its LED is switched on.
13. Click Save changes to flash at the upper right to make your changes
permanent, i.e., these settings will still be in effect after a reboot.