Xirrus XR-1220, Руководство пользователя

Страница: 167 / 200

Wireless Array
Configuring the Wireless Array 147
Configuring the Wireless Array
The following topics include procedures for configuring the Array using the
product’s embedded Web Management Interface (WMI). Procedures have been
organized into functional areas that reflect the
flow and content of the WMI.
The following WMI windows allow you to establish configuration parameters for
your Array, and include:

“Express Setup” on page 149

“Network” on page 156

“Services” on page 170

“VLANs” on page 185

“Security” on page 190

“SSIDs” on page 224

“Groups” on page 246

“IAPs” on page 253

“WDS” on page 302

“Filters” on page 308

“Clusters” on page 314
After making changes to the configuration settings of an Array you must click on
the
Save changes to flash button at the top of the configuration window,
otherwise the changes you make will not be applied the next time the Array is
rebooted.
Note that the Configuration menu section may be collapsed down to hide the
headings under it by clicking it. Click again to display the headings. (See
Figure 41 on page 84 .)

Some settings are only available if the Array’s license includes appropriate
Xirrus
Advanced Feature Sets . If a setting is unavailable (grayed out),
then your license does not support the feature. See “About Licensing and
Upgrades” on page 321 .