Xirrus XR-1220, Руководство пользователя

Страница: 180 / 200

Wireless Array
160 Configuring the Wireless Array
b. Subnet Mask : If you selected the Static IP option, enter a valid IP
address for the subnet mask (the default for Class C is 255.255.255.0).
The subnet mask defines the number of IP addresses that are
available on the routed subnet where the Array is located.
c. Default Gateway : If you selected the Static IP option, enter a valid IP
address for the default gateway . This is the IP address of the router
that the Array uses to transmit data to other networks.
d. Click the Apply button for this interface when done making IP
changes.
6.
When done configuring all interfaces as desired, click
Save changes to
flash if you wish to make your changes permanent.
See Also
Network Bonds
DNS Settings
Network
Network Statistics
Spanning Tree Status
Network Bonds
On models with more than one Gigabit port these ports may be bonded, i.e.
configured to work together in sets. For example, one port may provide active
backup or load balancing for another, or other options as described in this section.
XR-6000 Series Arrays have four Gigabit ports, and you may specify which ports
are bonded to work together as a pair. You may also bond all four ports to work
together in one group.
??True?? You may use the mirror option to bridge traffic between Gigabit ports or
to duplicate traffic from bonded ports to another port for troubleshooting with a
network analyzer.

If a set of Gigabit ports have been bonded, any changes you make to the
settings of one member will be reflected in the settings of the other members.
They cannot be configured separately.
??x true??