Xirrus XR-1220, Руководство пользователя

Страница: 162 / 200

Wireless Array
142 Viewing Status on the Wireless Array
System Log Window
This is a status only window that allows you to review the system log, where
system alerts and messages are displayed. Although there are no configuration
options available in this window, you do have the usual choice of deciding how
the event messages are sorted by clicking in the column header for the desired
field (Time Stamp, Priority, or Message).

Time Stamp — sorts the list based on the time the event occurred.

Priority — sorts the list based on the priority assigned to the message.

Message — sorts the list based on the message category
The displayed messages may be filtered by using the Filter Priority option, which
allows control of the minimum priority level displayed. For example, you may
choose (under
Services >System Log ) to log messages at or above Debug level
but use Filter Priority to display only those at Information level and above.
Figure 88. System Log (Alert Level Highlighted)
Use the Highlight Priority field if you wish to highlight messages at the selected
priority level. Click on the Refresh button to refresh the message list, or click on
the Clear All button at the upper left to delete all messages. You can also click in
the
Auto Refresh
check box to instruct the Array to refresh this window
automatically.
Note that there is a shortcut way to view system log messages. If you click Log
Messages near the bottom of the left hand frame, WMI displays counts of log
messages at different severity levels. Click a count to display just those messages
in the System Log window. See
Figure 40 on page 83 for more information.