Xilinx CAN FD v2.0 Скачать руководство пользователя страница 98

Страница: 98 / 98

CAN FD v2.0

PG223 December 5, 2018

www.xilinx.com

Appendix D:

Additional Resources and Legal Notices

Revision History

The following table shows the revision history for this document.

Please Read: Important Legal Notices

The information disclosed to you hereunder (the "Materials") is provided solely for the selection and use of Xilinx products. To the

maximum extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS

ALL WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF

MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether

in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any kind or nature related

to, arising under, or in connection with, the Materials (including your use of the Materials), including for any direct, indirect,

special, incidental, or consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or damage

suffered as a result of any action brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx had

been advised of the possibility of the same. Xilinx assumes no obligation to correct any errors contained in the Materials or to

notify you of updates to the Materials or to product specifications. You may not reproduce, modify, distribute, or publicly display

the Materials without prior written consent. Certain products are subject to the terms and conditions of Xilinx's limited warranty,

please refer to Xilinx's Terms of Sale which can be viewed at

https://www.xilinx.com/legal.htm#tos

; IP cores may be subject to

warranty and support terms contained in a license issued to you by Xilinx. Xilinx products are not designed or intended to be

fail-safe or for use in any application requiring fail-safe performance; you assume sole risk and liability for use of Xilinx products

in such critical applications, please refer to Xilinx's Terms of Sale which can be viewed at

https://www.xilinx.com/legal.htm#tos

AUTOMOTIVE APPLICATIONS DISCLAIMER

AUTOMOTIVE PRODUCTS (IDENTIFIED AS “XA” IN THE PART NUMBER) ARE NOT WARRANTED FOR USE IN THE DEPLOYMENT OF

AIRBAGS OR FOR USE IN APPLICATIONS THAT AFFECT CONTROL OF A VEHICLE (“SAFETY APPLICATION”) UNLESS THERE IS A

SAFETY CONCEPT OR REDUNDANCY FEATURE CONSISTENT WITH THE ISO 26262 AUTOMOTIVE SAFETY STANDARD (“SAFETY

DESIGN”). CUSTOMER SHALL, PRIOR TO USING OR DISTRIBUTING ANY SYSTEMS THAT INCORPORATE PRODUCTS, THOROUGHLY

TEST SUCH SYSTEMS FOR SAFETY PURPOSES. USE OF PRODUCTS IN A SAFETY APPLICATION WITHOUT A SAFETY DESIGN IS FULLY

AT THE RISK OF CUSTOMER, SUBJECT ONLY TO APPLICABLE LAWS AND REGULATIONS GOVERNING LIMITATIONS ON PRODUCT

LIABILITY.
© Copyright 2015-2018 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated

brands included herein are trademarks of Xilinx in the United States and other countries. All other trademarks are the property of

their respective owners.

Section

Revision Summary

12/5/2018 Version 2.0

Compliance Testing in Appendix A

Added information about ISO 16845-1:2016 conformance tests.

Table 2-1

Added APB Interface Signals to CAN FD Core I/O Signals table.

Added details for can_clk_x2.

Figure 4-1

Added explanations of new parameters in the Customize IP screen.

10/5/2016 Version 1.0

General updates

• Added a note in

section under

Chapter 2,

Product Specification

• Updated Automotive Applications Disclaimer in

Please Read:

Important Legal Notices

section.

11/18/2015 Version 1.0

N/A

Initial Xilinx release.

Send Feedback

Содержание CAN FD v2.0



































































































Результаты поиска

Содержание CAN FD v2.0

Отзывы:

Похожие инструкции для CAN FD v2.0

Бренды по названию

Популярные бренды

Xilinx CAN FD v2.0, Руководство по эксплуатации продукта

Результаты поиска

Содержание CAN FD v2.0

Отзывы:

Похожие инструкции для CAN FD v2.0

Бренды по названию

Популярные бренды