manualshive.com logo in svg

Xilinx CAN FD v2.0, Руководство по эксплуатации продукта, Страница: 83 / 98

Поделиться
Скачать
Xilinx CAN FD v2.0 Скачать руководство пользователя страница 83

CAN FD v2.0

83

PG223 December 5, 2018

www.xilinx.com

Chapter 4:

Design Flow Steps

Output Generation

For details, see the 

Vivado Design Suite User Guide: Designing with IP

 (UG896) 

[Ref 6]

.

Constraining the Core

This section contains information about constraining the core in the Vivado Design Suite.

Required Constraints

CAN and AXI4 clocks are treated as asynchronous to each other and the core writes out 

appropriate clock domain crossing constraints. 

Table 4-2

 shows the files delivered in the 

<project_name>/<project_name>.srcs/source_1/ip/<component_name>/

 

directory for core constraints.

Device, Package, and Speed Grade Selections

This section is not applicable for this IP core.

Clock Frequencies

The CAN clock and AXI4 clock can be asynchronous or clocked from the same source. When 

both clocks are asynchronous to each other, the AXI4 clock is required to run at a higher 

frequency.

• The CAN clock frequency can be 8 to 80 MHz.
• The AXI4 clock frequency can be 8 to 200 MHz.

Enable RX FIFO-1
Valid values are true and false.

EN_RX_FIFO_1
Valid values are true and false.

true

Note:

This parameter is valid only 

when the IP is in FIFO/Sequential 
mode and RX FIFO-1 is enabled.

RX FIFO-1 Depth
Valid values are 32 and 64.

C_RX_FIFO_1_DEPTH
Valid values are 32 and 64.

64

Note:

This parameter is valid only 

when the IP is in FIFO/Sequential 
mode and RX FIFO-1 is enabled.

Table 4-2:

Core Constraint Files

Name

Description

<component_name>.xdc

Core constraints

Table 4-1:

Vivado IDE Parameter to User Parameter Relationship 

(Cont’d)

Vivado IDE Parameter/Value

User Parameter/Value

Default Value

Send Feedback

Содержание CAN FD v2.0



































































































Отзывы:

Нет отзывов