Xerox Synergix 8825, Руководство пользователя

Страница: 123 / 162

XEROX WIDE FORMAT COPY SYSTEM Main Menu
•
117
The SCANNE R DIAGNOSTICS option of the DIAGNOSTICS menu
provides a sub-menu of the following choices:
•
IMAGE PATH - Enables you to validate the operation of the
image processing (IP) card and the image bar.
•
SCAN BAR - Enables you to calibrate the response of the scan
bar.
•
FULL SYSTEM TEST - Enables you to run all applicable tests on
the Scanner to determine if it is working properly.
•
WRITE NVR - Enables the Customer Service Engineer to modify
the contents of the non-volatile memory of the Scanner. The
diagnostic password is required for this function.
•
RESET NVR DEFAULTS - Enables the Customer Service
Engineer to reset the NVR values to the factory default values.
The diagnostic password is required for this function.
•
SCANNER RELIABILITY METER - Enables you to gather data
about the usage of the scanning mechanism.
•
SCANNER FAULTS (ORDERED) - Enables you to view the
entries in the internal Scanner Fault Log.
•
SCANNER FAULTS (COUNTS) - Enables you to view the last
cleared faults.
•
CLEAR SCANNER FAULT LOG - Enables the Customer Service
Engineer to erase the contents of the Scanner Fault Log. The
diagnostic password is required for this function.
•
CLEAN CALIBRATION ZO NE - Enable you to quickly move the
calibration surface to the cleaning position.
•
COMPONENT TESTS - Provides a sub-menu of Scanner
component diagnostic routines. Some of these routines are
accessible by both the operator and the Customer Service
Engineer. Others are accessible by the Customer Service
Engineer only and require the entry of the diagnostic password.
•
READ NVR - Enables you to examine the contents of the non-
volatile RAM (NVR).
To access the SCANNER DIAGNOSTICS menu:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key until DIAGNOSTICS is highlighted.
3. Press the Enter key to select DIAGNOSTICS. The
DIAGNOSTICS menu screen is displayed.
4. Press the Next key until SCANNER DIAGNOSTICS is
highlighted.
5. Press the Enter key to highlight SCANNER DIAGNOSTICS.
The SCANNER DIAGNOSTICS menu screen is displayed. The
black arrows indicate that the menu contains more options than
are visible. The selected option is highlighted.
SCANNER
DIAGNOSTICS