Xerox PHASER 5400, Руководство по расширенным функциям и устранению неисправностей

Страница: 53 / 127

Advanced Features and Troubleshooting Manual 37
Advanced Features
Booklet printing
This feature, accessible through the printer driver, makes it possible to print a document
in the form of a small booklet.
The printed images are reduced to half a page; with two page images on each side of
each sheet of paper. The page images are arranged as Pages 1 and N on Sheet 1/Side 1;
Pages 2 and N-1 on Sheet 1/Side 2; Pages 3 and N-2 on Sheet 2/Side 1; and so on. The
output sheets can then be folded and stapled following printing.
The optional Duplex Module must be installed to make use of this feature. The
duplex "Print on Both Sides" option must be selected on the driver screen.
The booklet printing feature is available for any paper sizes that can be used for
duplex printing. (See the table of supported paper sizes in the
User Guide .)
The booklet can have any number of page images. The printed output will contain
one fourth the number of sheets of paper (two page images per side per sheet).
If the total number of page images is not an exact multiple of four, there will be one or
more blank page images on the last sheet.
When you choose booklet printing, you can also print a border around each page and
specify the
creep and gutter . The gutter is the horizontal distance from the fold to the page
image (in points). The creep is the distance that page images are shifted inward (in 10ths of
a point); this compensates for the thickness of the folded paper, which otherwise would
cause the page images to shift slightly outward.
3925-49
3925-100
3925-101