Xerox PHASER 5400 Скачать руководство пользователя

Страница: 107 / 127

Advanced Features and Troubleshooting Manual

Control Panel Messages

NV Memory Fail

Power Off/On

Nonvolatile memory on the printer controller has failed and printing cannot

resume.

Power OFF and ON the printer.

If the problem persists, contact your Customer Support Center.

Offline

The printer is offline, not in menu mode, and without any fault conditions.

(Offline does not mean the printer is disconnected from a host. It means page

formatting and printing are halted.)

To put the printer online, press the

On Line

key (labeled

To select menus, press the

Menu

keys (labeled

Open Rear Tray Dr

Clear Paper Path

Open rear tray door of the 2000-Sheet Feeder and remove the paper jam.

Close all covers and trays, then refer back to the control panel for further

messages.

Open Stacker Door

Clear Paper Path

Follows a paper jam at the Stacker Bin.

The jam access door on the back of the Stacker Bin must be opened and

paper removed from the paper path.

Close all covers and trays, then refer back to the control panel for further

messages.

PCL

Out of Memory

The current PCL job cannot print, because it exceeds available memory.

Split the job into smaller jobs.

Install additional memory.

Paper Jam-

Open Top Cover

A paper jam has occurred inside the top cover.

Open the printer’s top cover, then refer back to the control panel for further

messages.

Paper Size Jam-

Open Rear Cover

The size of the paper fed into the printer was not the size expected by the

printer, causing a jam.

Load any tray with the size requested in the job printing.

Check the Multi-sheet Bypass Feeder size menu to confirm that the setting

reflects the size currently loaded in it.

Check that the paper side guides are adjusted to the paper stacks in all

trays.

Open the printer’s rear cover, then refer back to the control panel for

further messages.

Please Wait...

An operation that takes time is proceeding.

Please wait until the operation finishes.

Power Saver On

No print jobs have been received for the set period of time for the Power

Saver, so the printer has set itself to lower power mode.

As soon as it receives the next print job, the printer returns to regular power

mode.

Press Menu

Appears when in the menu system and you selected the Password menu but

there are no secure or proof jobs in the job queue.

Press the

Menu

keys (labeled

) to access another menu.

Press the

On Line

key (labeled

) to exit the menu system.

Print Cartridge

OEM ID Mismatch

The print cartridge is not a Xerox manufactured print cartridge for this

printer.

Replace with the correct print cartridge.

Error

Description and corrective action

Содержание PHASER 5400
































































































































Результаты поиска

Содержание PHASER 5400

Отзывы:

Похожие инструкции для PHASER 5400

Бренды по названию

Популярные бренды

Xerox PHASER 5400, Руководство по расширенным функциям и устранению неисправностей

Результаты поиска

Содержание PHASER 5400

Отзывы:

Похожие инструкции для PHASER 5400

Бренды по названию

Популярные бренды