Xerox PHASER 5400, Руководство по расширенным функциям и устранению неисправностей

Страница: 120 / 127

104 Xerox Phaser 5400 Laser Printer
Appendix C - Unique Printer Commands
Output selection
The following table lists the output destinations supported by the printer along with the
PCL commands and PJL values to select them. (The values listed in the PJL column are the
settings associated with the PJL “OUTBIN” variable.)
Additional PJL commands
The printer supports the standard set of PJL commands. The following table lists the PJL
extensions specific to the Xerox Phaser 5400 laser printer.
Output selection
Destination PCL5e command
1
1. The character following the “&” in the command string is the lower case character “L.”.
PJL (used by PCL5e and PCL6)
value for variable “OUTBIN”
Automatic (no request) E
c
&l0G
Standard Bin E
c
&l1G FACEDOWN or UPPER or STANDARD
Stacker Bin E
c
&l2G LOWER or OPTIONALOUTPUTBIN1
Printer specific PJL commands
Function PJL command Value range
Start Secure Job @PJL XSECUREJOB n/a
Start Proof Job @PJL XPROOFJOB n/a
Job Password Assign @PJL SET XJOBPASSWORD = integer 4-digit string (0-7)
Resolution @PJL SET RESO:UTION = integer 600, 1200
1200 dpi Quality @PJL SET X1200QUALITY = value ON, OFF
Select Collated Sets @PJL SET QTY = integer 0-999
Select an Emulation @PJL ENTER LANGUAGE= “ language “ PostScript, PCL, PCLXL,
XFLASH
Hard Disk Drive File
Delete
@PJL FSDELETE NAME = “ pathname “ See page 56.
Hard Disk Drive File
Download
@PJL FSDOWNLOAD... See page 54.
Hard Disk Drive or Flash
Initialize
@PJL FSINIT VOLUME = “ pathname “
Hard Disk Drive or Flash
Directory Create
@PJL FSMKDIR NAME = “ pathname “
Line Termination @PJL SET XLINETERMINATION = value ON, OFF
Page Size Continue
(Page Policy)
@PJL DEFAULT PAGESIZECONTINUE =
value
OFF,
IGNORESIZE,
IGNORETYPE,
IGNORETYPEANDSIZE
Edge to Edge @PJL SET XEDGETOEDGE = value ON, OFF