![background image](http://html1.mh-extra.com/html/xerox/5915/5915_service-manual_884767038.webp)
4-3
1. Main Drive/2. Paper Handling
Section 4 Disassembly/Assembly/Adjustment
1.1.1 Main Motor Replacement
Removal
1.
WARNING:
Power off the machine and
disconnect the
power cord.
2. Open the Front Cover and the machine.
3. Remove the Drum Unit ……………....... (5.1.1)
4. Remove the Rear Upper Cover.
5. (Fig. 1): Remove the Main Motor.
➀
. Disconnect P/J404.
➁
. Remove screws (3).
➂
. Remove Main Motor
(Fig. 1)
Installation
1. Perform the installation in the reverse order of
the removal.
2.1.1 Side Registration Adjustment
Purpose
To adjust the position of the Cassette
Tray to align the document image
transferred onto the Drum with
paper(in the Drum axis direction).
Reference
The Tray positions in front/rear
directions are each adjustable by
2mm (4mm in total) .
Adjustment
1. Slide out the Cassette Tray from the machine.
2. (Fig. 1): Perform the Side Registration
Adjustment as follows.
NOTE
:
•
The Right/Left Stoppers should be
moved by the same distance.
➀
. Remove Screws.
➁
. Install Screws to slots of both
Stoppers respectively.
➂
. Change the positions of Stoppers.
A direction (Front): X will widen.
B direction (Rear): X will narrow.
➃
. Tighten Screws.
(Fig. 1)
3. (Fig. 1): After adjustment make a copy-if it is
NOT OK, repeat Steps 1~3.
Содержание 5915
