Xerox 5915, Руководство по обслуживанию

Страница: 119 / 146

6-9 6.6 Program Setting
Section 6 GENERAL
6.6 Program Setting
6.6.1 Entering the Program Mode
Press the Program button as “Ready to Copy” is
on display.
Note : Inapplicable in the Interrupt Mode.
6.6.2 Entering the program number
and setup value.
•
If you enter an inappropriate Program
number or setup value, “Er” appears.
Press the Clear button to enter a new value.
•
Enter a Program number using the keypad,
or select setup values using the Reduce
/Enlarge button or by moving the Paper
Supply button . See “Entry” of the Program
List.
6.6.3 Exiting the Program Mode
•
Press the Program button.
•
Press the All Clear button.
•
The machine automatically exits the Program
mode if no buttons have been pressed for
more than a minute.
6.6.4 Program operation procedure
Note : Operational procedure is different for the
Program Number 81/83/84.
See 6.6.5 Operational Procedure for
displaying the number of copies made.
1. Enter the Program Mode
2. Select the Program number to set up and
press the Start button.
•
Current values flash on the displays of
Magnification, Tray, or Number of copies.
3. If you don’t change the current values, press
the Start button and go to Step 5.
4. Select or enter a new setup values and press
the Start button.
Note : See the Program List far entering setup
values.
•
Setup values will be changed.
5. If you have other features to set up, go back to
Step 2.
6. Exit the Program Mode.
6.6.5 Operation procedure to display
the number of copies made.
Note : This applies only to the Program Number
8I/83/84.
1. Enter the Program Mode.
2. Enter Program Number “81” and press the
Start button.
•
LCD shows the copy volume made by the
Drum cartridge.
3. Enter Program Number “83” and press the
Start button.
•
LCD shows the copy volume made by the
Customer.
4. Enter Program Number “84” and press the
•
LCD shows the copy volume made by the
Toner cartridge.
5. Press the Clear button and the display goes
back to the display ready to enter Program
Number.
6. Exit the Program Mode.
Program
No.
Item Value Description
Default
Value
21 Auto Clear 0 Disable 1
1 Enable
24 Auto Tray Shut off
1: 2min 4: 16min 7: 2hrs
2: 4min 5: 30min 8: 4hrs
3: 8min 6: 1hrs 9: 8hrs
5
(30 Min)
0: Disable
25 Magnification priority 100%
→
70%
→
81%
→
86%
→
141%
→
100% 100
0 Newspaper
45
Priority of setting up a
Copy Mode
1 Text 1
2 Photo
51
Setting up Edge Erase
amount
0 16mm By 1mm 10mm
52 Margin Shift 0 16mm By 1mm 10mm
53
Setting up Center Erase
amount
6 16mm By 1mm 10mm
81
Display the CV made by
the Drum Cartridge Shows the number of copies that have been made on the
Drum cartridge. Unchangeable.
83
Display the CV made by
the machine Shows the number of copies that have been made on the
machine. Unchangeable.
84
Display the CV made by
the Toner Cartridge Shows the number of copies that have been made on the
Toner cartridge. Unchangeable.
85
Check the serial No. of
the machine
Check the serial No. of the machine
86 Setting Start Modes 0
No-password
mode
0
1
Single-password
mode