Page 2
Microsoft Windows (NetBEUI) Peer-to-Peer Networks Quick Install Card
Xerox Document Centre 460/470 ST
Go to the workstations and...
1.
Verify that the
NetBEUI
protocol is loaded
(ALL Windows 3.11 or greater versions).
2.
Use the
CentreWare Network Services
CD-ROM
to install print drivers on a
Windows-based workstation. Details for
this are found in the document supplied
with your printer entitled
Network
Services Guide
.
3.
On the Configuration Report review the
NetBIOS:
area and note the
Workgroup
,
Host Name,
and
Printer Name
.
Windows for Workgroups Users
•
Open the
Control Panel
and double-click
the
Printers
icon.
•
Select the printer driver you just installed
and click
Connect
.
•
Select an available port and click
Network
.
•
Double-click the name of the WorkGroup for
the printer.
•
Double-click the Host Name of the printer.
•
Click once on the Printer Name then click
OK
.
Windows 95, Windows 98 and Windows
NT 4.X Workstation Users
•
Click the
Start
button and select
Settings
.
•
From the cascade menu select
Printers
.
•
Select a printer with the right mouse button.
•
Select the
Properties
entry in the cascade
menu.
•
Select the
Details
tab on the Properties
dialog.
•
Click the
Add Port
button and browse to the
Workgroup.
•
Double-click the name of the WorkGroup for
the printer as shown on the
Configuration
Report
.
•
Double-click the Host Name of the printer as
shown on the
Configuration Report
.
•
Click once on the Printer Name then click
OK
.
4.
Open an application and print a test page
to verify operation.
5.
If your print job does not print, refer to the
Troubleshooting section of the
Network
Installation and Troubleshooting Guide
to solve the problem.
d)
Press the
Connections
button.
7.
Set Maximum Connections and Timeout
a)
Touch the
Maximum Connections
soft button on the Touch Screen and
using the keypad enter the desired
maximum connection number
between 1 and 30. It is recommended
that this value should be set at the
default.
b)
Touch the
Connection Timeout
soft
button on the Touch Screen. On the
keypad enter the desired number of
second between 0 and 9999. Press
Save
to exit the Connections Screen.
8.
Exit the Tools Menu
a)
Press the
Exit Tools
button.
9.
Prepare for print driver installtion
10.
Obtain a
Configuration Report
from the
printer to use in the remainder of the
installation.
11.
From the documentation package supplied
with your printer, retrieve the
CentreWare
Network Services CD-ROM
and the
document entitled
Network Services
Guide
. Proceed to the next section of this
procedure called
Go to the workstations
and.
