Page 3
Microsoft Windows NT 4.0 Server (TCP/IP) Quick Install Card
Xerox Document Centre 460/470 ST
k)
If the printer will not be shared, click
Next>
. To share the printer, check the
share
checkbox, enter a Share Name,
then click
Next>
.
l)
At the next dialog it is recommended
that you print a test page. Click
Finish
.
m)
Wait for the Test Print to print. A new
dialog will ask for confirmation of the
test print. If the page printed, click
Yes.
If it did not print; run the Printing
Troubleshooter in NT to solve the
problem.
3.
Send a test job to the printer
a)
Check your test job for quality and use
the problem solving section of the
Document Centre 460/470
Reference Guide
for resolving print
defects.
b)
If your print job does not print, refer to
the troubleshooting section in the
document entitled
Network
Installation and Troubleshooting
Guide
to correct the problem.
Go to the workstation and...
1.
Verify that the TCP/IP protocol stack is
loaded.
2.
Use the
CentreWare Network Services
CD-ROM
to install print drivers. Details for
this are found in the document supplied
with your printer entitled
Network
Services Guide
.
3.
Connect the printer that you just created to
the shared resource on the server.
4.
Open an application on the workstation
and print a test page to verify operation.
5.
Check your test job for quality and use the
problem solving section of the
Document
Centre 460/470 Reference Guide
for
resolving print defects.
6.
Repeat this
Go to the workstation and...
procedure for each workstation on the
network that will print to the printer.
