Page 1
Microsoft Windows NT 4.0 Server (TCP/IP) Quick Install Card
Xerox Document Centre 460/470 ST
Go to the printer and...
1.
Connect your Document Centre to the
network with the appropriate cabling
2.
Enter the Tools pathway
a)
Press the
Access
( )
button.
b)
On the keypad enter
1111
or the
current password. Press the
Enter
button when finished. Press the
Go to
Tools
button.
c)
The Touch Screen will be used for the
remainder of the data entry.
3.
Enter the Network Setup menus
a)
Wait for the screen to refresh and
press the
Connectivity and Network
Setup
button.
b)
Wait for the screen to refresh and
press the
Network Setup
button.
c)
Press the
TCP/IP Options
button.
4.
Enable the Protocol and Media
a)
Press the
TCP/IP Settings
button.
b)
Press the
Protocol and Media
button.
c)
Press the
Enable
button. If Physical
Media buttons appear, select either
Ethernet
or
Token Ring
. Press
Save
.
NOTE: The Broadcast Address will be calcu-
lated automatically.
5.
Set the Host Name
a)
Press the
Name/Address
button.
b)
One at a time press the soft buttons on
the Touch Screen for each octet of the
IP address and enter the numbers
using the keypad.
c)
Press the
Host Name
button.
d)
When the soft keypad appears, type
the host name EXACTLY as you want
it to appear with correct case. When
finished press the
Save
button to
record the changes and exit to the
TCP/IP Settings Screen.
Before You Start
To enable 100BaseT or a Token Ring interface,
refer to the
100BaseT Ethernet and Token
Ring Interface Quick Install Card
to configure
the Speed and Source Routing settings for your
environment. Then return to this card.
Your Document Centre has DHCP enabled by
default. If you have configured a DHCP server
with TCP/IP information, you can connect your
Document Centre to your network and it will
retrieve its TCP/IP information from the DHCP
server when it is turned on.
You can manually assign or use BOOTP or
RARP servers to assign TCP/IP information to
your Document Centre. Refer to the Static,
DHCP/BOOTP, and RARP Quick Install Cards
for details.
If you are using DHCP, perform
Steps 1
through 6c
but
DO NOT
change any values.
Then read the note before step 6d and
determine if you wish to change the lpr port
number. After choosing, complete the
remainder of the procedure.
Record the following information:
IP Address ____________________________
Subnet Mask ___________________________
Default Gateway ________________________
For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797 Canada: 1-800-939-3769
