background image

DISTRIBUTING PRINT DRIVERS

Page 2

Distribution by Shared Resource

On Client/Server or Peer to Peer networks you 
may want to copy the necessary folders or indi-
vidual drivers to a shared drive, or mount the 
entire CD as a shared volume. If your users 
have access to an intranet, you might want to 
have the drivers available on an internal Web 
Server.

PROS:

A large number of workstations can have 
drivers loaded.

A large variety of print drivers can be distrib-
uted easily.

Users at remote sites (dial-in accounts) can 
connect, load drivers, and use local printers.

CONS:

Network bandwidth is consumed loading 
drivers.

The shared resource must be available to 
each individual in order to load drivers.

Once you have established this shared 
resource, you can distribute a hard copy docu-
ment or an email message with instructions on 
installation to all workstation users that will use 
these drivers. 

Installation instructions for the print drivers can 
be found in the 

Network Services Guide

 docu-

ment.

Distribution by E-Mail

You may want to email individual drivers to all 
users. Due to its size, it is NOT recommended 
you distribute the CentreWare Conductor soft-
ware in this manner.

PROS:

Users will not need access to a shared 
resource.

Users will get just the driver they need and 
no others.

Installation instructions and the driver can 
be sent in the same message.

CONS:

Due to the size of some drivers, Email serv-
ers can be overloaded when a distribution 
takes place.

E-Mail storms may occur when users for-
ward drivers to each other.

Once you have established an E-Mail message 
distribution list you can update drivers when 
necessary.

Before You Start

Once you have installed your printer on the net-
work, you will probably need to load one or more 
print drivers on other workstations. Distributing 
the CD-ROM can be a very time consuming 
task. The information on this card will help you to 
distribute the drivers quickly and with minimal 
administration. 

The Network Services CD (CD 2) 
Directory structure

The CD-ROM contains the following directories:

These folders contain the various PostScript and 
PCL drivers that support the Document Centre  
as well as other Xerox printers.

You should open these folders to decide which 
drivers and PPD files you will need for your 
application then review the rest of this card to 
decide the best method for distribution.

Conductor
disk folders
are here

©1999 Xerox Corporation. Product names used on these cards may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.

701P97322

Содержание 460







































Отзывы: