Xerox 4150 - WorkCentre B/W Laser, Руководство пользователя

Страница: 16 / 201

1 Welcome
12 Xerox WorkCentre 4150 User Guide
In order to allow this equipment to operate in proximity to Industrial Scientific
and Medical (ISM) equipment, the external radiation from the ISM equipment
may have to be limited or special mitigation measures taken.
Shielded interface cables must be used with this product to maintain
compliance with Council Directive 89/336/EEC.
Regulatory Information
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interferences at their own expense.
Changes or modifications to this equipment not specifically approved by the
Xerox Corporation may void the user’s authority to operate this equipment.
WARNING:
Shielded cables must be used with this equipment to maintain
compliance with FCC regulations.
ICES-003
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
US Regulatory Information for the Fax Kit option
Model Number:
XRX-FAXKIT
Fax Send Header Requirements: The Telephone Consumer Protection Act
of 1991 makes it unlawful for any person to use a computer or other electronic
device, including FAX machines, to send any message unless such message
clearly contains in a margin at the top or bottom of each transmitted page or
on the first page of the transmission, the date and time it is sent and an
identification of the business or other entity, or other individual sending the
message and the telephone number of the sending machine or such business,
other entity, or individual. (The telephone number provided may not be a 900
number or any other number for which charges exceed local or long-distance
transmission charges.) The country location, telephone number identifying the
machine, the header text information (business name), the send and receive
behavior and dial type must be entered when installing the Embedded Fax kit
option. For more information on setting the fax defaults, refer to
Fax
Transmission Defaults in the Setups chapter on page 116. For further