Xcruiser XDSR600HD, Руководство пользователя

Страница: 59 / 71

59
XDSR600HD
Problem Solution
Remote Control
does not operate Point remote control directly towards the
STB.
Check that the STB button lights up when
you press any button
Check and replace batteries.
No or Bad Signal [ For DVB-S2 tuner model only]
Check the LNB ; Replace the LNB if
necessary.
Check the cable from the LNB.
Check the position of the dish; realign dish
if necessary.
If you are using a DiSEqC 1.0 switch, check
that you have connected and programmed
the LNBs to the correct connections on the
switch.
[ For DVB-T(T2) tuner model only ]
Check the connection of Aerial antenna line.
[ For DVB-C tuner model only ]
Check the connection of Broadcasting Cable
line.
[Common features for all types of DVB
receivers ]
Check the ‘Signal Level’ and the ‘Signal
Quality’.
For any other technical queries please contact: support@xcruiser.net
Problem Solution
Does not display
any message on the
front panel. Check the main power cable and check that
it is plugged into a suitable power outlet.
Check the STB main power switch ‘ON’ at
the rear of the STB.
No Picture See
‘Does not display any message on the front panel’
above.
To match the STB system with your TV
system (PAL/NTSC), press
V.Format
button
until a picture is displayed.
Check the video output port is firmly
connected to the TV or VCR.
Check that you have selected the Video
Input on your TV.
Press the STB button on the remote to
assure you are controlling the STB and no
other device with the remote.
Check the brightness level of the TV.
Check the resolution that your TV supports,
and set the proper resolution with the
remote
Resolution
button to obtain a picture.
Poor picture quality See
‘No Picture’ above.
Check the signal level, if this is low then tries
adjusting the alignment of your dish.
No Sound See
‘No Picture’
above.
Check the volume level of the TV and STB.
Check the Mute status of the TV and STB.
Troubleshooting
www.xcruiser.net www.xcruiser.net
XDSR600HD XDSR600HD
www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net
Point remote control directly towards the Point remote control directly towards the
STB. STB.
Check that the STB button lights up when Check that the STB button lights up when
you press any button you press any button
Check and replace batteries. Check and replace batteries.
No or Bad Signal No or Bad Signal [ For DVB-S2 tuner model only] [ For DVB-S2 tuner model only]
Check the LNB ; Replace the LNB if Check the LNB ; Replace the LNB if
necessary. necessary.
www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net www.xcruiser.net
Check the video output port is firmly Check the video output port is firmly
connected to the TV or VCR. connected to the TV or VCR.
Check that you have selected the Video Check that you have selected the Video
Input on your TV. Input on your TV.
Press the STB button on the remote to Press the STB button on the remote to
assure you are controlling the STB and no assure you are controlling the STB and no
other device with the remote. other device with the remote.
Check the brightness level of the TV. Check the brightness level of the TV.
Check the resolution that your TV supports, Check the resolution that your TV supports,
and set the proper resolution with the and set the proper resolution with the
remote remote
Resolution Resolution
button to obtain a picture. button to obtain a picture.
Poor picture quality Poor picture quality See See
‘No Picture’ above. ‘No Picture’ above.
Check the signal level, if this is low then tries Check the signal level, if this is low then tries
adjusting the alignment of your dish. adjusting the alignment of your dish.
No Sound No Sound
Troubleshooting Troubleshooting