49
XDSR600HD
(Tuner) will be automatically
disabled.
Frequency:
Select the satellite
frequency you want to use to
check for a signal.
Positioner:
Select the positioner.
None:
(No Positioner)
Using DiSEqC 1.2:
Move:
To move the dish, press
LEFT/RIGHT
button.
Fine Move:
To move the dish in
smaller steps, press the
LEFT/
RIGHT ARROW
button.
Step:
Set to positioner moving
steps as 1, 2, 3, 4
Positioner Command:
To use various
positioner commands, press
3.2. Positioner Setting
Satellite:
Select the satellite
which you want to search for the
Service.
Press the
LEFT/RIGHT ARROW
button to select the satellite.
If you press the
OK
button, a
complete satellite list will be
displayed.
Select the wanted satellite name.
If the desired satellite name is not
listed then select User Defined.
Tuner:
Select tuner that you want
to set
(Tuner 1/ Tuner 2).
If you
have set
‘Loop-Through’
in the
menu
(Installation-Dish Setting-
Tuner Connection),
this menu
frequency manually using the
NUMERIC
buttons.
When you select Universal LNB
type, both 9750 and 10600 are
supported at the same time. And
then the LNB 22KHz setting is
disabled.
LNB 22KHz:
When you use a
separate coax 22 KHz tone switch
box, make the 22 KHz tone switch
enabled or disabled to select
the input you desire of the tone
switch.
DiSEqC Switch:
If you use
DiSEqC 1.0 or DiSEqC 1.1 switch,
select one of the DiSEqC inputs.
the
OK
button. Then, available
positioner commands will appear.
Using USALS:
Move:
To move the dish, press the
LEFT/RIGHT
button.
Fine Move:
To move the dish in
smaller steps, press the
LEFT/
RIGHT ARROW
button.
Step:
Set to positioner moving
steps as 1, 2, 3, 4
Dish Longitude:
Enter the longitude
position of the antenna using the
NUMERIC
buttons.
Dish Latitude:
Enter the latitude
using the
NUMERIC
buttons.
Go To:
Press the
OK
button to
rotate the dish to the selected
antenna position.
www.xcruiser.net
www.xcruiser.net
XDSR600HD
XDSR600HD
(Tuner) will be automatically
(Tuner) will be automatically
disabled.
disabled.
Frequency:
Frequency:
Select the satellite
Select the satellite
frequency you want to use to
frequency you want to use to
check for a signal.
check for a signal.
Positioner:
Positioner:
which you want to search for the
which you want to search for the
LEFT/RIGHT ARROW
LEFT/RIGHT ARROW
button to select the satellite.
button to select the satellite.
If you press the
If you press the
OK
OK
button, a
button, a
OK
OK
OK
complete satellite list will be
complete satellite list will be
displayed.
displayed.
Select the wanted satellite name.
Select the wanted satellite name.
If the desired satellite name is not
If the desired satellite name is not
listed then select User Defined.
listed then select User Defined.
Tuner:
Tuner:
separate coax 22 KHz tone switch
separate coax 22 KHz tone switch
box, make the 22 KHz tone switch
box, make the 22 KHz tone switch
enabled or disabled to select
enabled or disabled to select
the input you desire of the tone
the input you desire of the tone
DiSEqC Switch:
DiSEqC Switch:
If you use
If you use
DiSEqC 1.0 or DiSEqC 1.1 switch,
DiSEqC 1.0 or DiSEqC 1.1 switch,
select one of the DiSEqC inputs.
select one of the DiSEqC inputs.
