Xcel-Arc RazorWeld Razor TIG320 ACDC, Руководство по эксплуатации

Страница: 19 / 56

19
Set Up Procedure for MMA (Stick) Welding:
Razor
32OAC/DC TIG-MMA
Turn the Encoder to set
the Inginition AMP value
DC MMA MODE: Select by pushing the
button to illuminate the icon. AC MMA MODE: Select by pushing the
button to illuminate the icon.
Ignition Amp: Select by turning the encoder knob
to cycle through to illuminate the Ignition AMP
icon.
Push the Encoder to
lock the icon ready for
adjustment.
The value selected shown on the
digital display represents the amount
AMPS Selected
7.
MMA DC - AC MODE SELECT -
Provides selection MMA Mode (
stick welding)
and DC or AC Mode.
8.
MMA IGNITION AMP -
Provides selection and adjustment of the electrode IGNITION start up properties.
Sets the hot start stricking arc current for the electrode start characteristic.
Turn the Encoder to set
the Inginition time value
Ignition time: Select by turning the encoder knob
to cycle through to illuminate the Ignition AMP
icon. Push the Encoder to
lock the icon ready for
adjustment.
The value selected shown on the
digital display represents the amount
AMPS Selected
8.
MMA IGNITION TIME -
Provides selection and adjustment of the electrode IGNITION Time start.
Sets the time that the MMA Arc Ignition AMP time is on.
Turn the Encoder to set
the AMP set value
Amp set: Select by turning the encoder knob
to cycle through to illuminate the Ignition AMP
icon. Push the Encoder to
lock the icon ready for
adjustment.
The value selected shown on the
digital display represents the amount
AMPS Selected
8.
MMA AMP SET -
Provides selection and adjustment of welding current in MMA Mode.
Turn the Encoder to set
the Arc Force value
ARC Force: Select by turning the encoder knob to
cycle through to illuminate the ARC Force icon. Push the Encoder to
lock the icon ready for
adjustment.
The value selected shown on the
digital display represents extra Amps
applied to the electrode when short
circuit is about to occur.
8.
MMA Arc Force Control -
Provides selection for adjustment of the ARC FORCE during MMA (Stick) welding.
Allows setting from a soft buttery arc characteristic to a more digging, penetrating arc.