Xcel-Arc RazorWeld Razor TIG320 ACDC Скачать руководство пользователя страница 18

Страница: 18 / 56

Continued - Weld Program Selection & Setting

Razor

32OAC/DC

TIG-MMA

- SPOT Weld Program -

Selecting SPOT Weld program parameters

Parameter selection: Select by turning the

Encoder Knob to cycle

through the weld parameter icons.
The icon will illuminate when selected.

Push the encoder knob to lock the icon. The LED icon will blink on
and off ready for adjustment of the parameter.

Turn the Encoder

to adjust the setting. Push the Encoder to

lock the setting.

SPOT WELD: Select by pushing
the button to cycle through
to illuminate the icon.

Turn the Encoder to set
the SPOT ON time value
Range is (0.01 - 1.0 sec)

SPOT ON TIME: Select by turning the encoder
knob to cycle through to illuminate the icon.

Push the Encoder to
lock the icon ready for
adjustment.

The value selected shown on
the digital display represents the
amount of time the welding current
stays on after the trigger has been
pressed and the arc established.

SPOT ON TIME -

Provides selection and adjustment of the ON TIME of the weld during SPOT Weld cycle.

Adjusts the amount of time the welding output stays on after arc igintion.

SPOT MODE -

Selecting SPOT mode allows setting of an ON time and OFF time of the welding cuurent. After pressing

the torch switch and generating an established arc the welding current will stay on for the amount of ON TIME, (

set in the SPOT

weld program

) the arc will go out after the set amount has passed. Keeping the torch switch depressed will allow an OFF TIME

(

interval

) (

set in the SPOT weld program

) period before the arc is re-established and the welding current stays on again for the set

amount of ON TIME, the cycle will repeat until the torch switch is released.

Turn the Encoder to set
the SPOT ON time value

Range is (0.1 - 5.0 sec)

SPOT OFF TIME: Select by turning the encoder
knob to cycle through to illuminate the icon.

Push the Encoder to
lock the icon ready for
adjustment.

The value selected shown on
the digital display represents the
amount of time the welding current
stays off during the SPOT weld
cycle.

SPOT OFF TIME -

Provides selection and adjustment of the OFF TIME of the weld during SPOT Weld cycle.

Adjusts the amount of the OFF time interval of the welding current.

Содержание RazorWeld Razor TIG320 ACDC

























































Результаты поиска

Содержание RazorWeld Razor TIG320 ACDC

Отзывы:

Похожие инструкции для RazorWeld Razor TIG320 ACDC

Бренды по названию

Популярные бренды

Xcel-Arc RazorWeld Razor TIG320 ACDC, Руководство по эксплуатации

Результаты поиска

Содержание RazorWeld Razor TIG320 ACDC

Отзывы:

Похожие инструкции для RazorWeld Razor TIG320 ACDC

Бренды по названию

Популярные бренды