Xcel-Arc RazorWeld Razor TIG320 ACDC, Руководство по эксплуатации

Страница: 28 / 56

28
DC HF TIG Welding Standard Set Up Procedure:
Razor
32OAC/DC TIG-MMA
Turn the Encoder to set
the Peak Amp value
Turn the Encoder to set
the Down Slope time
Turn the Encoder to set
the Finish Amp value
Peak Amp: Select by turning the encoder to cycle
through to illuminate the Peak Amp icon.
Base Amp: Select by turning the encoder to cycle
through to illuminate the Down Slope icon.
Finish Amp: Select by turning the encoder knob to
cycle through to illuminate the Finish Amp icon.
The setting shows on the digital
display. It is the maximum am-
perage the machine will deliver
during welding
The setting shows on the digi-
tal display. It is the time taken
for the welding amps to drop
down to the finish amperage.
The setting shows on the digital
display. It is the amperage the
machine will deliver at the finish
of the welding sequence.
9. Select Amperage
10. Select Down Slope Time
11. Select Finish Amperage
Push the Encoder to
lock the icon ready for
adjustment.
Push the Encoder to
lock the icon ready for
adjustment.
Push the Encoder to
lock the icon ready for
adjustment.
Turn the Encoder to set
the Finish Amp value
Post Gas Time: Select by turning the encoder
knob to cycle through to illuminate the Post Gas
Timer icon.
12. Select Post Flow Gas Time
Push the Encoder to
lock the icon ready for
adjustment.
4. Lay the outside edge of the Gas
Cup on the work piece with the
Tungsten Electrode 1- 3mm from
the work piece
5. Press the torch switch and the
arc will ignite across the gap be-
tween the tungsten and work piece.
Hold even distance of about 2mm
gap between the tungsten and work
piece to maintain the arc.
6. Release the torch switch to bring
in the end of the welding sequence
dependant of 2T or 4T trigger func-
tion choice
1. Assemble the front end torch
parts use the correct size and
type of tungsten electrode for
the job, the tungsten electrode
requires a sharpened point for
DC welding
Weld start procedure for HF AC, DC and MIX ARC TIG welding