Xcel-Arc RazorWeld Razor TIG320 ACDC, Руководство по эксплуатации

Страница: 17 / 56

17
Continued - Weld Program Selection & Setting
Razor
32OAC/DC TIG-MMA
Tungsten Diameter -
Provides selection of the correct tungsten diameter for the set welding parameters.
Warning Alert appears if the parameters are outside the capability of the tungsten diameter.
Tungsten Size Alert -
Appears if the parameters are outside the capability of the tungsten diameter.
Turn the Encoder to set
the Tungsten diameter
Range is (1.0 - 4.0mm)
Tungsten Diameter Select: Select by turning the
encoder knob to cycle through to illuminate the
icon. Push the Encoder to
lock the icon ready for
adjustment. The value selected shown on the
digital display represents the % of
time that the Peak Amp is on dur-
ing the pulse cycle.
The ALERT icon will illuminate when the amperage set is out-
side the recommended current carrying capability of the selected
tungsten diameter during AC and MIX ARC welding.
The machine will operate when the Alert is on, the alert is to assit in
prevention of over loading the tungsten with amperage causing it to
disintergrate. Adjust the amperage down or increase the tungsten
diameter to better match the tungsten diameter capabilty.
6C
- MIX ARC Weld Program -
Selecting MIX ARC program parameters
Parameter selection: Select by turning the Encoder Knob to cycle
through the weld parameter icons.
The icon will illuminate when selected.
Push the encoder knob to lock the icon. The LED icon will blink on
and off ready for adjustment of the parameter.
Turn the Encoder to adjust the setting. Push the Encoder to
lock the setting.
MIX ARC Tig: Select by pushing
the button to cycle through
to illuminate the MIX icon.
Turn the Encoder to set
the MIX ARC Frequency
(Hz) value
Range is (1-10 Hz)
Turn the Encoder to set
the MIX ARC % value
Range is (5-95%)
MIX Hz: Select by turning the encoder knob to
cycle through to illuminate the Hz icon.
MIX Hz: Select by turning the encoder knob to
cycle through to illuminate the % icon.
Push the Encoder to
lock the icon ready for
adjustment.
Push the Encoder to
lock the icon ready for
adjustment.
The value selected shown on the
digital display represents the num-
ber of times per second that the
output welding current switches
from AC to DC–
The value selected shown on the
digital display represents the %
of DC- output during MIX ARC
welding.
MIX Hz -
Provides selection and adjustment of the frequency of AC output to DC– output during MIX ARC welding.
Adjusts the frequency Hz (
times per second
) that the output current switches from AC to DC–
MIX % -
Provides selection and adjustment of the % of DC– output during the MIX ARC welding cycle.
Adjusts the amount of DC– output during MIX ARC welding.