Xcel-Arc RazorWeld Razor TIG320 ACDC, Руководство по эксплуатации

Страница: 42 / 56

42
amperage
adjustment
ATER1MS-10H
on-off
button
Razor
32OAC/DC TIG-MMA
Remote Amperage Control Operation Procedure
Connection and operation of the remote hand control
1. Connect the remote control 7 pin
plug from the Tig Torch switch lead
to the 7 pin remote receptacle on the
front panel of the machine.
4. Rotate the dial to adjust the amperage
output of the machine. The remote can
be used static or during welding to adjust
the amps up or down. 5. The amps set by the remote
control will show in the display
on the front panel.
1. Connect the remote control 7 pin
plug from the Tig Torch switch lead
to the 7 pin remote receptacle on the
front panel of the machine.
Connection and operation of the remote foot control
XA-RFC-2
Remote amperage controls allow remote welding current adjustment from the welding machine during welding.
3. Up & down travel of the foot
pedal will adjust the welding
amperage during welding. The
side potentiometer knob will al-
low manual set and adjustment.
3.Select torch mounted remote control by pushing the Remote
button to illuminate the icon.
2. Select 4T or 4S trigger function as required by the pushing the TORCH MODE button to
cycle through the trigger options. The icon will illuminate for the selected trigger option.
Note: remote hand amp control requires 4T or 4S trigger option, it wont work with 2T or 2S
3.Select torch mounted remote control by pushing the Remote
button to illuminate the icon.