WorldViz PPT-E, Руководство по эксплуатации, Страница: 83 / 163

Usage Scenarios
77
Add the "Intersense" post-process plugin and afterwards "MoCap" post-process
plugin found in the Configuration Pane (Figure 2). It is important to add the plug-ins
in this order. You can also use the "VRPN Input" plugin if you wish to keep the
orientation sensor connected to your rendering PC to minimize latency. Some kind of
orientation direction for the head is required for the MoCap plugin however.
Figure 2: Post-Process Plugins
Click on the "Intersense" plugin to bring the Intersense options window up. Click the
"Add" button, enter the COM port number your IC2 / IC3 is connected to and select
the PPT wireless marker number (1 - head, 2 - left hand, 3 - right hand, 4 - left foot,
5 - right foot, 6 - hips) to be attached with the Intersense (Figure 3). Right-click the
added device, select "Reset" and follow the instructions for aligning the Intersense's
coordinate system with PPT's coordinate system. If you use additional IC2s / IC3s for
your hips, hands, or feet, click the "Add" button again and repeat above steps.
Figure 3: Add IC2 / IC3 and attach it with a marker