WorldViz PPT-E, Руководство по эксплуатации, Страница: 128 / 163

PPT User’s Manual
122
Closing the tool
Be sure to close the Device Tool before attempting to connect to the wand with PPT
software. Otherwise, the Device Tool will hold its connection and not allow PPT to
form a connection.
Connection establishment problem
If you still cannot connect the PPT WAND in PPT Studio after the steps above, please
contact
support@worldviz.com
INSTALLING WAND RECE IVER DRIVERS
If on Windows XP, you have to first install the FTDI drivers if it's not already installed
– you may not have to do it for Windows 7. These drivers enable the USB connection
of the wireless Intersense receivers. When you plug the wireless Intersense receiver
into a USB port, it will ask you to install the drivers. You can find the drivers (32 and
64bit) at: C:\Program Files\WorldViz\PPTStudio32\FTDI USB Drivers
Windows will ask you to install two different drivers, this is normal. After that is
done, go to your Device Manager and make sure under Ports (COM & LPT) you see
USB Serial Port(COMX) where X is the port number you have to enter in your script,
viztracker, etc.
Now, on the receiver, you should see a single LED turned ON.