WorldViz PPT-E, Руководство по эксплуатации, Страница: 32 / 163

PPT User’s Manual
26
STEP 9: (CAMERA 1 ONLY)
Use the three gen-lock cables to
connect the cameras in your system
into a chain. First, plug one end of
one of these cords into the T-
connector of camera '1' (red).
NOTE: The gen-lock terminal on
camera '1' remains empty.
STEP 10: (CAMERAS 2 & 3 ONLY)
Connect the remaining two T-
connectors to the gen-lock jacks on
cameras 2 and 3.
Next, connect the loose cable from
camera one (split from the video-
out) into the T-connector of camera 2
(blue).
Then, use the second cable to
connect the T-connector of camera
'2' (blue) to the T-connector of
camera '3' (yellow)
STEP 11: (CAMERA 4 ONLY)
Finally, use the third cable to connect
the T-connector of camera '3'
(yellow) directly into the "gen-lock"
jack of camera '4' (green).
STEP 12:
Look at the switches on the upper
right hand side of each camera. Your
system will arrive with theses
switches in the appropriate settings