WorldViz PPT-E, Руководство по эксплуатации, Страница: 126 / 163

PPT User’s Manual
120
If this step fails, power-cycle your wand and start again with “Resetting your link”
above.
In this example screen, we see that the receiver (Blue square) on port 4, channel 12,
sees and is linked with wand station 13 with ID 7082.
NOTE: Sometimes, the receiver sees the wand but doesn't form a link, then you
might see the stn13 7082 box not as green but as grey next to the column of 4
boxes. If you see that, click on the stn box and drag it into the top empty box in the
row.
Setting link ID
Now we should set the link IDs. This helps to reduce interference with other wireless
devices and also it enables you to communicate with multiple wireless intersense
sensors (up to 4) through the same receiver and keep the same order each time. Go
to Wireless – Set Link IDs and type in the link ID (7082) and add it to the List. Hit
“OK”.