WorldViz PPT-E, Руководство по эксплуатации, Страница: 144 / 163

PPT User’s Manual
138
Tuning 3D Plugin v2.0:
Before beginning, ensure that your PPT cameras are all properly configured and you
have a recent, good quality calibration . If not, then perform those steps first.
1. Turn off all of the PPT markers.
2. Ensure that no false lights can be seen in each camera. Check each camera
image in the
Cameras panel and ensure that no lights are detected (indicated
by yellow cross-hairs).
3. Turn on 1 LED marker.
4. Click on the Start button to begin sampling.
5. Move the marker around as if you were using it in your application. Make sure
that you cover the entire space the marker will move during your application
and move the marker at the maximum speed the marker will move when used
in your application.
6. Inspect and then accept the suggested settings. If the values look very large
compared to the usual values or the defaults, you may need to perform the
tuning process again, or perhaps try recalibrating your cameras.
CAMERA
PPT-X
Use this plugin for interfacing with PPT-X cameras. The options available for
configuration are:
Progressive vs Interlace:
Interlace Recommended
The progressive setting can sometimes offer higher quality at the cost of higher
latency.