WorldViz PPT-E, Руководство по эксплуатации, Страница: 24 / 163

PPT User’s Manual
18
Step 3:
Insert the USB connector for the
attached fan into the back of the
camera.
Connect an Ethernet cable to the back
of the camera and run the cable to the
main PPT processing computer. The
cable must be capable of operating
with gigabit Ethernet, and so should be
rated to at least CAT5e standard.
Step 4:
Plug one of the provided 12 volt DC
power supply into one of the supplied
10-pin round adapters. Plug the 10-pin
round connector into the left plug on
the back of the cameras.
Once you have connected each
camera's power supply, you will need
to supply it with AC power. Typically,
you will plug the power supply into a
nearby power socket. If more length is
required, you can use any AC
extension lead or you can order DC
extension cables from WorldViz.
Step 5:
Each camera has a sync cable adaptor
with two inputs and a 12-pin round
connector. These adaptors connect the
camera to the long black power/video
sync cables. The end of the
power/video sync cables are labeled
"CAMERA" and "SYNC BOX". Plug the
"CAMERA" end of the power/video sync
cable into the sync adapter, and then
the sync adaptor into the camera.
The sync cable adaptors will all have
the same colors except for one. The
differently colored adaptor is known as
the master adaptor. Any camera may
be configured as the sync master, but